Atlas Engineering has openings for the
following positions for both the New Orleans
and Houston
offices:
Individual ideals we look for in our candidates:
Ø Self starting team
leader, team member
Ø Confidant,
optimistic, devoted, focused
Ø High moral
character
Ø Personable and
professional communication and writing skills
Ø Desire for a
ground floor opportunity with a growing company – long stability for a
stable professional
Senior Project / Process Engineers
Knowledge and Skills::
Ø BSME or BSCE
preferred
Ø 10 years (plus)
diversified and growing experience with detailed design, construction, and
pre-commissioning of domestic upstream / midstream oil & natural gas
facilities
Ø Strong engineering
design and working knowledge with equipment systems associated with such
facilities – Onshore and Offshore (i.e. well production control, 3-phase
separation, gas compression, pumping, dehydration, treating, liquids
extraction, crude topping, utility systems, etc.)
Ø Strong with
applicable CAD programs (process and hydraulics)
Ø Strong working
knowledge of associated common industry codes and standards, including Federal
Codes such as 49 CFR Parts 192 & 195, 30 CFR Part 250, 29 CFR Part
1910.119, etc., Industry codes such as ASME B31.3, B31.4, B31.8, and all
applicable API standards & recommended practices, etc. Knowledge of predominant State codes is a
plus
Ø From an EPC and
EPCM project design and execution perspective, understanding of
specification, procurement, commissioning and start-up standards,
documentation, practices, vendor approvals, etc. Strong ability to determine and write
scopes of work for fabrication and construction to be contracted and
performed by others
Ø Strong with
technical and industry practice contribution pursuant to preparing
proposals, contract packages, etc.
Ø Strong with cost,
benefit and risk analyses
Ø Experienced with
stage gate project execution methods, including content and preparation of
Decision Support Packages
Ø Strong support
capabilities pursuant to project costing, man-hour estimations, listing of
required deliverables, scheduling, procurement, construction, commissioning
and general operations
v Additional plusses
are capabilities and experience with:
o
HAZID and HAZOP workshops
o
Constructability reviews and analyses
o
Knowledge of major domestic suppliers of equipment and
construction
o
Stage gate project execution methodologies and practices
o
Proficiency with PFD’s and
P&ID development, including all basic process design and hydraulic
simulations / calculations
o
Full Cycle project planning, budgeting and reporting
o
Understanding of design approach – 3D versus 2D
o
Petroleum engineering (wells and drilling)
Senior
Project Engineer
Houston, TX
Ø
Atlas
Engineering, Inc. seeks Sr. Project Engineer in Houston, TX
to prepare & coordinate all logistical & financial aspects of
Engineering Procurement Construction (EPC) Management Projects in the field
of oil & gas commercial facilities.
Ø
Candidate
must have Bachelor’s plus experience.
Ø
Email
resume to hr@atlasengineering.com,
or Fax to (713) 939-6769. Put job code AEI-005 on resume.
Senior Mechanical Engineers
Knowledge and Skills:
Ø BSME preferred
Ø 10 years (plus)
experienced with materials and major equipment associated with domestic
upstream / midstream oil & natural gas facilities
Ø Strong working knowledge
with equipment system specification, general operation, general
installation, general maintenance, control and materials – Onshore and
Offshore (i.e. gas compressors, pumps, valves, piping, dehydration
equipment, coolers, separators, treating equipment, air compressors,
utility systems, etc.).
Ø Strong working
knowledge of associated common industry codes and standards, including
Federal Codes such as 49 CFR Parts 192 & 195, 30 CFR Part 250, 29 CFR
Part 1910.119, and industry codes such as ASME B31.3, B31.4, B31.8, and API
standards & recommended practices as applicable
Ø From an EPC and
EPCM project design and execution perspective, understanding of
specification, procurement, commissioning and start-up standards,
documentation, practices, vendor data approvals, etc.
Ø Experienced with
stage gate project execution methods, including content and preparation of
Decision Support Packages
v Additional plusses
are capabilities and experience with:
o
HAZID and HAZOP workshops
o
Shop and field fabrication reviews
o
Knowledge of major domestic suppliers of equipment,
fabrication and construction
o
Strong in assisting with PFD’s
and P&ID development, including basic process design and hydraulic
simulations
o
Stress analyses, and mechanical designs of supports,
guides, anchors, hangers, etc.
o
Full Cycle project planning, budgeting and reporting
o
Understanding of design approach – 3D versus 2D
Lead Project Electrical Engineer:
Knowledge and Skills:
Ø 15 years plus
experience
Ø Registered P.E. – fully
knowledgeable of all applicable US domestic codes and industry practices
Ø Recent Domestic
Experience – upstream and midstream oil & gas projects (will consider
limited petrochemical)
Ø Substations and
main power distribution systems (high and medium voltage – common to oil
& gas facilities)
Ø Instrument wiring
and power interconnect systems
Ø Electrical Panel
specifications / basic drawings
Ø Backup power
generation – specification through start-up supervision (equipment
manufactured by others)
Ø Motor Control Centers
(MCC) and Switchgear specification (manufacture by others)
Ø Grounding and
lightning Suppression systems
Ø Electrical
security, monitoring and communication systems (equipment procured by
manufacturers as specified)
Ø Lighting
Ø Electrical area
classification drawings
Ø Conduit and cable
specification and schedules
Lead Project Instrument Engineer:
Knowledge and Skills:
Ø 15 years (plus)
experience with specification of instrument, control and safety components
for domestic upstream / midstream oil and gas projects
Ø P.E. preferred
Ø Expert
understanding of API RP 14C, OSHA 29 CFR Part 1910.119, 49 CFR Parts 192
and 195, and 30 CFR Part 250 as applicable to process instrumentation and
safety systems
Ø Expert
understanding of ISA specification requirements, as applicable and modified
for oil & gas industry standards
Ø Thorough knowledge
of common upstream / midstream process, utility systems and industry
standards, including capability to review and contribute to development of P&ID’s
Ø Knowledge of
procurement, inspection and calibration requirements for all kinds of
instruments, control and safety components common to oil & gas
facilities
Ø Excellent
communication skills and ability to proficiently support and direct
designers toward production of project control and safety system drawings
and details
Lead Project Instrument Engineer:
Knowledge and Skills:
Ø 15 years (plus)
experience with specification of computer system automated control, safety,
fire protection, security and SCADA systems common to domestic upstream /
midstream oil and gas projects
Ø P.E. preferred
Ø Expert
understanding of API RP 14C, OSHA 29 CFR Part 1910.119, 49 CFR Parts 192
and 195, and 30 CFR Part 250 as applicable to process control and safety
systems
Ø Expert
understanding of ISA specification requirements, as applicable and modified
for oil & gas industry standards
Ø Thorough knowledge
of common upstream / midstream process, utility systems and industry
standards, including capability to review and contribute to development of P&ID’s
Ø Knowledge of all
necessary procurement, inspection and functional analysis testing
requirements for computer automated oil & gas facility control, safety,
security, fire protection and SCADA systems
Senior Piping Engineer
Knowledge and Skills:
Ø BSME required, PE
preferred
Ø 10 years (plus)
experienced with materials and processes associated with domestic upstream
/ midstream oil & natural gas facilities
Ø Expert working
knowledge of codes, standards and industry practices associated with piping
systems, including all ASME published standards for piping materials and
design. Strong working knowledge of
API standards and recommended practices associated with piping
systems. Strong knowledge of piping
requirements described by Federal Codes such as 49 CFR Parts 192 & 195,
30 CFR Part 250, 29 CFR Part 1910.119.
Expert ability to specify piping system materials conforming to
same, as appropriate for CADD database development and purchase
requisitioning
Ø Expert ability to
calculate piping stresses, bending, loading and flexibility, by hand
calculations, and CAD systems such as Caesar II.
Ø Expert ability to
direct the modeling of piping systems for dynamic and harmonic analyses by outside
firms specializing in such analyses, and expert in design of supports,
guides, restraints and anchor provisions to meet the requirements of such
analyses.
Ø Expert ability to
establish requirements for piping supports, guides, restraints and anchor provisions
to meet all design loads imposed by given piping configurations, sizes /
allowable spans, pressure testing, and process flows / pressures /
temperatures, hammer effects, etc.
Ø Strong ability to
plan and document proper piping system installation sequencing and
provisions
Ø Strong ability to
review 3-D CADD models and 2-D drawings for optimized routing and prudent
engineering judgment considerations, above that expected of a senior design
draftsman.
Ø Strong familiarity
with process instrumentation and controls, including their general
installation and maintenance requirements.
Strong familiarity with equipment systems common to upstream /
midstream oil & natural gas facilities. – Onshore and Offshore (i.e. gas
compressors, pumps, valves, piping, dehydration equipment, coolers,
separators, treating equipment, air compressors, utility systems,
etc.).
v Additional plusses
are capabilities and experience with:
o
Shop and field fabrication reviews
o
Knowledge of major domestic suppliers of equipment,
fabrication and construction
o
Strong in assisting with PFD’s
and P&ID development, including basic process design and hydraulic
simulations
o
Understanding of design approach – 3D versus 2D
Senior Pipeline Engineer - Onshore
Knowledge and Skills:
Ø
BSME or BSCE required, PE preferred
Ø
10 years (plus) experienced with
materials and processes associated with the transportation by pipeline of
hydrocarbons, including those regulated by FERC 7c and DOT.
Ø
Expert working knowledge of codes,
standards and industry practices associated with pipeline design and
construction, including all ASME and MSS published standards for piping
materials and design.
Ø
Expert working knowledge of pipeline
design requirements prescribed by Federal Codes such as 49 CFR Parts 192
& 195, 30, 29 CFR Part 1910.119, Nationwide 12 Permits, and
others. Expert ability to specify
piping system materials conforming to same, as appropriate for CADD
database development and purchase requisitioning
Ø
Expert ability to calculate pipeline
stresses, bending, loading and flexibility, by hand calculations and / or
by recognized CAD programs
Ø
Expert ability to establish
requirements for pipeline bedding and supports, negative buoyancy, thrust
blocks, guides, restraints and above ground anchor provisions to meet all
design loads imposed by given piping configurations, sizes / allowable
spans, pressure testing, and process flows / pressures / temperatures,
hammer effects, etc.
Ø
Expert knowledge of pipeline
construction in all soil mediums, including rock. Strong ability to specify geotechnical
surveys to be performed by companies specializing in such investigations
and analyses, along with the ability to understand the returned results and
implement appropriate project specific requirements
Ø
Expert understanding of corrosion,
abrasion and all other common coating systems.
Ø
Strong familiarity with sacrificial
and impressed current cathodic protection
systems, including appropriate isolation provisions
Ø
Strong familiarity with lightning
suppression systems
Ø
Strong understanding of ability to
plan and document construction methods as required for determining
permanent and temporary ROW requirements, conventional onshore lay
construction, horizontal directional drills, horizontal slick and dry
boring, trench and spoil requirements, sequencing of installation and
testing, material handling and traceability, etc.
Ø
Expert understanding of
construction, operation and instrument pigging operations, including
pipeline designs accordingly
Ø
Strong understanding of land
surveying, coordinate conventions and conversions,
industry standard alignment drawings, maps, and ROW acquisition support and
agreement accommodations, etc.
Ø
Within pipeline related facilities,
strong ability to review 3-D CADD models and 2-D drawings for optimized
routing and prudent engineering judgment considerations, above that
expected of a senior design draftsman.
Ø
Strong familiarity with process
instrumentation and controls, including their general installation and
maintenance requirements. Strong
familiarity with equipment systems common to hydrocarbon transportation
systems and associated facilities (i.e. gas compressors, pumps, valves,
piping, dehydration equipment, coolers, separators, treating equipment, air
compressors, utility systems, etc.).
v
Additional plusses are capabilities
and experience with:
o
Professional shop and field
fabrication and construction scheduling, reviews & tracking
o
Knowledge of major domestic
suppliers of equipment, fabrication and construction
o
Strong in assisting with P&ID
development, including hydraulic simulations
o
Understanding of design approach –
3D versus 2D
o
Inland waters and offshore pipeline
design, permitting and construction
ELECTRICAL & INSTRUMENT DESIGN CHECKER
Knowledge and Skills:
Ø Electrical and/or
Instrument Design Checker should have 20+ years experience involving
offshore platform or compressor station design.
Ø Electrical &
Instrument Design Checker will coordinate with Group Leader in the
production of drawings by the design-drafting group from the initial start
to the completion or final issue. Should be knowledgeable of all applicable
codes, standards, symbols, specifications, and project related
requirements.
Ø The Design Checker
shall be capable of doing the following in a timely manner:
Ø Review design
scope and review steps outlined to Group Leader and group personnel by
Drafting Supervisor.
Ø Acquire basic
engineering design requirements with Group Leader based on job related
events, decisions, or instructions to Group Leader.
Ø Supervise file
management of drawings with Group Leader by ceasing all modification after
submittal for check to ensure a secure and complete review. Incorporating
additional comments only after a check cycle has been completed and such
comments are consistent.
Ø Provide a list of
standard associated support documents/drawings to be supplied with each
drawing being checked which would vary by type of drawing.
Ø Verify clearance
and interference to coordinate with other disciplines, vendor data, and
client comments/revisions.
Ø Candidates should
be capable of checking the following types of drawings:
Single/one line diagrams
Ø Wiring diagrams
Ø Motor Control
Schematics
Ø Motor Control Center (MCC)/Switchgear
(SWGR)
Ø Plans &
associated details for Power/Control, Lighting, Cable tray, Grounding
Ø Cable schedules
Capable of extracting information from P & ID’s & Instrument Index
AutoCAD (3D Cadworx a plus)
ELECTRICAL & INSTRUMENT DESIGNER
Knowledge and Skills:
Ø
Electrical and/or Instrument Designer should have 15+ years
experience involving offshore platform or compressor station design.
Ø
Electrical & Instrument Designer shall coordinate
with the Group Leader in the production of drawings from the initial start
to the completion or final issue. Should be knowledgeable of all applicable
codes, standards, symbols, specifications, and project related
requirements.
Ø
The Designer shall be capable of doing the following
in a timely manner:
Ø
Review design scope and steps outlined by Group Leader
and Drafting Supervisor.
Ø
Acquire basic engineering design requirements from
Group Leader based on job related events, decisions or instructions to
Group Leader.
Ø
Maintain file management of drawings with Group Leader
and ceasing all modification after submittal for check to ensure a secure
and complete review. Incorporates additional comments only after a check
cycle has been completed and such comments are consistent.
Ø
Acquire standard associated support documents/drawings
to be supplied with each drawing during development and to supply while
being checked which would vary by type of drawing.
Ø
Verify clearance and interference to coordinate with
other disciplines, vendor data, and client comments/revisions.
Ø
Should be capable of instructing Drafter to develop
drawings to provide basic backgrounds to provide additional information on
as data is available.
Ø
Candidates should be capable of designing the
following types of drawings:
Single/one line diagrams
Ø
Wiring diagrams
Ø
Motor Control Schematics
Ø
Motor Control Center (MCC)/Switchgear
(SWGR)
Ø
Plans & associated details for Power/Control,
Lighting, Cable tray, Grounding
Ø
Cable schedules
Capable of extracting information from P & ID’s & Instrument Index
AutoCAD (3D Cadworx a plus)
ELECTRICAL & INSTRUMENT DESIGN GROUP
LEADER
Knowledge and Skills:
Ø Electrical and/or
Instrument Design Group Leader should have 15+ years experience involving
offshore platform or compressor station design.
Ø Drafting Group Leader
coordinates group personnel in all aspects of projects and production of
drawings. Interface with Engineers during design/drafting phases ensuring
scheduled completion.
Ø Communicate with
Design Supervisor, Project Engineers and other discipline Group Leaders
striving for project completion reflecting revisions/changes per effected
disciplines.
Ø Review with Design
Supervisor design scope, define tasks, establish procedures, maintain
scheduled completion, and outline steps to group personnel.
Ø Review project
documents, drawings, and specifications, list design requirements and
questions to discuss with Electrical or Instrument Engineers.
Ø Maintain
engineering, fabrication, or vendor schedule noting other discipline
completion dates related to starting activities and substantiate schedule
changes.
Ø Determine basic
engineering design requirements with job related events, decisions, or
instructions to direct group personnel to maintain drawing list/quantity,
completion percentages, dates, and man-hours.
Ø Expedite drawing
transmittal and maintain transmittal records with Design Supervisor.
Ø Supervise file
management of drawings in progress, issued originals, and past projects.
Maintain standard system of project and vendor information and/or drawings
to simplify access for job development.
Ø Oversee group
personnel to ensure quality and consistency to the best of their ability.
Ø Candidates should
be capable of designing the following types of drawings:
Single/one line diagrams
Ø Wiring diagrams
Ø Motor Control
Schematics
Ø Motor Control Center (MCC)/Switchgear
(SWGR)
Ø Plans &
associated details for Power/Control, Lighting, Cable tray, Grounding
Ø Cable schedules
Capable of extracting information from P & ID’s & Instrument Index
AutoCAD (3D Cadworx a plus)
ELECTRICAL & INSTRUMENT DESIGN
SUPERVISOR
Knowledge and Skills:
Ø Design Supervisor coordinates group leaders and group
personnel in all aspects of projects and production of drawings. Interface with
Engineers during design/drafting phases ensuring scheduled completion.
Ø Communicate with Project Engineers and other discipline
Design Supervisors and/or Group Leaders striving for project completion
reflecting revisions/changes affecting other disciplines.
Ø Review design scope, define tasks, assign personnel and
establish procedures, schedule completion, outline steps to group leaders
and group personnel.
Ø Review project documents, drawings, and specifications, list
design requirements and questions to discuss with Electrical or Instrument
Engineers.
Ø Review engineering, fabrication, or vendor schedule noting
other discipline completion dates related to starting activities and
substantiate schedule changes.
Ø Determine basic engineering design requirements with job
related events, decisions, or instructions to direct group leaders and/or
group personnel to estimate drawing list/quantity, completion percentages,
dates, and man-hours.
Ø Expedite transmittal of drawings and maintain drawing
transmittal records.
Ø Supervise file management of drawings in progress, issued
originals, and past
Ø projects. Maintain standard system of project and vendor information
and or
Ø drawings to simplify access for job development.
Ø Estimate drawing package for proposal purposes to secure
additional work based
Ø on
prior project records and history of previous case situations.
Ø Recommend promotion and/or pay increases after appropriate
review of personnel
Ø based
on accomplishment and improvement. Oversee group(s) to ensure quality
Ø and
consistency to the best of their ability.
ELECTRICAL & INSTRUMENT DRAFTER
Knowledge and Skills:
Ø Electrical and/or
Instrument Drafter should have 10+ years experience involving offshore
platform or compressor station drawing development.
Ø Electrical & Instrument
Drafter shall coordinate with the Designer and Group Leader in the
production of drawings. Should be familiar with all applicable codes,
standards, symbols, specifications, and project related requirements.
Ø The Drafter shall
be capable of doing the following in a timely manner:
Ø Review design as
outlined by the Designer and Group Leader.
Ø Acquire basic
design requirements from the Designer based on job related events,
decisions, or instructions as per the Group Leader.
Ø Maintain file management
of drawings per Designer and cease all modification after submittal for
check to ensure a secure and complete review. Incorporates additional
comments only after a check cycle has been completed and such comments are
verifiably consistent per the Designer.
Ø Develop drawing
from support documents/drawings that would vary by type of drawing supplied
with each drawing during development.
Ø The Drafter shall
be capable of verifying clearance and interference with Designer to
coordinate with other disciplines, vendor data, and client
comments/revisions.
Ø Should be capable
of comprehending design instruction to develop drawings to provide basic
backgrounds to provide additional information on as data is available.
Ø Candidates should
be capable of drafting the following types of drawings:
Single/one line diagrams
Ø Wiring diagrams
Ø Motor Control
Schematics
Ø Motor Control Center (MCC)/Switchgear
(SWGR)
Ø Plans &
associated details for Power/Control, Lighting, Cable tray, Grounding
Ø Cable schedules
Capable of extracting information from P & ID’s & Instrument Index
AutoCAD (3D Cadworx a plus)
Lead
Project / Structural Engineers
Knowledge and Skills:
Ø Bachelors in
Civil/Structural Engineering and Professional Engineering license
required. Masters degree a plus.
Ø Offshore
experience – 5 years (plus) experience leading a structural design team of
engineers and designers on various offshore projects. 10 years (plus) total experience in
engineering and design of offshore projects.
Ø Strong communication
skills required for client, subcontractor and multi-discipline
coordination.
Ø Strong design
experience with applicable structural analysis programs such as SACS or
StruCAD. Experience with GRLWEAP,
MOSES or Caesar II a plus.
Ø Strong working
knowledge of associated common industry codes and standards, including API
RP 2A, AISC and AWS.
Ø Experience working
in a fast paced environment to meet demanding client needs and schedules
while maintaining project quality.
Senior
Structural Engineers
Knowledge and Skills:
Ø Bachelors in
Civil/Structural Engineering.
Professional Engineering license and Masters degree a plus.
Ø Offshore
experience – 3 years (plus) experience in engineering and design of
offshore projects.
Ø Strong
communication skills required for client, subcontractor and
multi-discipline coordination.
Ø Strong design
experience with applicable structural analysis programs such as SACS or
StruCAD. Experience with GRLWEAP,
MOSES or Caesar II a plus.
Ø Strong working
knowledge of associated common industry codes and standards, including API
RP 2A, AISC and AWS.
Ø Experience working
in a fast paced environment to meet demanding client needs and schedules
while maintaining project quality.
Structural
Engineers
Knowledge and Skills:
Ø Bachelors in
Civil/Structural Engineering - Masters Degree a plus.
Ø Strong educational
background in ASD or LRFD Steel Design and structural analysis.
Ø Strong
communication skills required for multi-discipline
coordination.
Ø Strong computer
skills required.
Ø Willingness to
work in a fast paced offshore engineering environment to meet demanding
client needs and schedules while maintaining project quality.
Ø Willingness to
travel to various jobsites for short-term assignments.
Corporate Benefits and Safety...
|
